Product Details
The Honeywell 51304335-175, also cataloged as the MC-TAOX12 Analog Output Field Termination Assembly, operates as a dedicated hardware component for 8-channel analog signal termination and field loop routing within Honeywell Universal Control Network (UCN) platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 51304335-175 |
| Brand | Honeywell |
| Origin | USA |
| Weight | Approx. 0.45 kg |
| Dimensions | Standard Honeywell FTA mounting card footprint |
| Operating Temp | -20 deg C to +70 deg C |
| Power Consumption | Max. 2.5 W at 24 VDC |
| Alternate Part Number | MC-TAOX12 |
| Number of Channels | 8 analog output channels |
| Signal Range | 0-20 mA or 4-20 mA |
| Maximum Load Resistance | 250 ohm |
| Communication Interface | Modbus RTU |
| Hazardous Location Approval | Class I, Division 2, Group D |
| MTBF | > 50,000 hours |
4-20 mA HART Loop Protocol and Channel-to-Channel Isolation
The field termination assembly incorporates galvanically isolated current drivers and internal filtering circuits to enforce channel-to-channel isolation across all 8 analog output lines. By maintaining high dielectric isolation between field loops and internal system buses, the board suppresses ground potential shifts and prevents electrical noise crosstalk from degrading signal precision on active 4-20 mA HART loop protocol instruments or 0-20 mA control loops.
Frequently Asked Questions
Q: What is the maximum load resistance supported per current loop on the 51304335-175?
A: Each of the 8 output channels supports a maximum loop load resistance of 250 ohm when operating within the standard 0-20 mA or 4-20 mA output ranges.
Q: How is the 51304335-175 grounded in a Class I, Division 2 hazardous area installation?
A: Frame grounding is established via dedicated chassis mounting screws, and field cable shields must be grounded at one point on the FTA ground bar to satisfy Class I, Division 2 requirements.
Q: Can the 51304335-175 assembly be installed in redundant UCN I/O configurations?
A: Yes, the board layout is designed for dual-redundant cable connection to redundant Analog Output I/O processor modules within Honeywell UCN architecture.
Field Installation Guidelines
- Ensure backplane power and external 24 VDC loop supplies are de-energized prior to connecting interface cables or terminal wiring.
- Mount the assembly onto the standard cabinet DIN rail or carrier channel using integrated mounting clips.
- Fasten signal cable drain wires directly to the FTA shield terminal bar to maintain continuous grounding and prevent high-frequency noise pickup.
- Confirm field loop total resistance does not exceed 250 ohm to prevent current driver saturation during peak 20 mA signal output
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Understanding Root Causes of Unplanned PLC Stop Mode in Industrial Automation
Modern Programmable Logic Controllers manage execution through distinct operational states: Run, Stop, Start-Up, and Hold. During power-up, a controller initializes memory registers within Stop mode before briefly transitioning to Start-Up mode. During this phase, internal self-diagnostics evaluate system integrity across hardware and user programs. If the controller detects no critical faults, it enters Run mode to execute the control program continuously. However, any severe system anomaly forces the CPU back into Stop mode immediately to prevent erratic machine behavior across the plant floor.
Human-Machine Interface Design: Essential Guide to HMI Selection, Visualization, and Control System Integration
Human-Machine Interfaces (HMIs) serve as the primary operational window into complex industrial automation systems. Modern HMIs convert raw machine data into clear graphical displays, enabling operators to oversee entire manufacturing processes in real time. Instead of relying on physical control panels full of hardwired switches, engineers program interactive screens using intuitive graphics, dynamic color coding, and responsive touch interfaces. Over my 15 years in control systems engineering, I have observed HMIs transform from basic display screens into sophisticated command centers that drive operational efficiency across DCS and PLC environments.
Understanding Safety Relays in Industrial Automation: Architecture, Operation, and Functional Safety
Standard electromechanical relays provide basic electrical isolation between low-voltage control circuits and high-power output loads. A traditional switching relay features a magnetic coil driving mechanical Common (COM), Normally-Open (NO), and Normally-Closed (NC) contacts. However, standard relays pose severe functional risks when deployed in critical safety interlock circuits. High current inrush or mechanical wear can weld contacts together permanently. If contact welding occurs in an emergency stop circuit, pressing the button fails to halt hazardous machinery movements. Consequently, global functional safety standards prohibit standard relays for critical machine guarding functions.