The Allen-Bradley 1756-L1 is a ControlLogix 5550 controller. It can support up to 250 connections and weighs 0.28 kilograms or 10.0 ounces. This particular controller has a 64 Kilobytes user memory. Installing the 1756-L1 is installed directly into any slot available in the chassis and multiple controllers can be installed in any other slot within the same chassis. These controllers that belong to the same chassis, may communicate communicate with each other across the backplane as well as operate independently. The 1756-L1 has the capacity to communicate across DeviceNet, RS-232-C (DF1/DH-485 protocol), ControlNet, DH+, and EtherNet/IP networks. Note that it does not have a nonvolatile memory.

The 1756-L1 has a peak backplane current of 0.65 Amps at 5 Volts DC and 0.02 Amps at 24 Volts DC. It also has an average power dissipation of 3.3 Watts and an average thermal dissipation of 11.3 BTU/hour. The storage temperature of the 1756-L1 is from -40 to 85 Degrees Celsius, while its operating temperature ranges from 0 to 60 Degrees Celsius. It also has a noncondensing relative humidity of 5% to 95%. The storage shock of the 1756-L1 is 50 G peak for 11 milliseconds, while its operating shock is 30 G peak for 11 milliseconds. It also has a 10 to 500 Hertz vibration with a maximum peak acceleration of 2.0 G. If the 1756-L1 has a battery in need of replacement, you can only use the 1756-BA1, which is a 0.59g lithium battery. The programming cable compatible with the 1756-L1 are the category 3 serial cables 1756-CP3 and 1747-CP3.

The Allen-Bradley 1756-L1 is a Programmable Automation Controller (PAC) processor module that belongs to the ControlLogix product family. This processor belongs to one of the earlier versions of ControlLogix, the Logix 5550 category.

This module features an integrated RS232 communication port with 64KB user memory. It is also has a diagnostic front panel that reports the module’s state through embedded LED lights. delivered with a battery back-up for the integrated Random-Access Memory (RAM) however, this processor is not installed with a non-volatile memory. To install a non-volatile memory for this controller, appropriate memory modules are 1756-M1, 1756-M2 and 1756-M3 are the only compatible modules. Do not use other memory modules as this will result to module failure.

This module is installed to any ControlLogix chassis such as 1756-A4, 1756-A7, 1756-A10, 1756-A13 and 1756-A17. It occupies single slot of the chassis and module power is provided by the backplane which is energized by a ControlLogix Power supply.

This controller is capable of controlling medium scale processes. It supports IEC-61131-2 defined programming language standards such as Ladder, Function Block, Sequential Function Chart, Statement List programming languages.

The integrated RS232 provides interface to programming devices, Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA) and other Visualization and Control systems. It also supports stand-alone and distributed I/O allocation with the use of ControlLogix I/O, Flex I/O and POINT I/O modules.

This controller is parameterized, configured and commissioned with the use of RSLogix 5000 programming software. Communication setup is defined via the RSLinx Classic or Enterprise edition where communication drivers are defined.

1756-WS	3ADT315100R1001 SDCS-POW-4	900C75-0360-00
1715-TADIB16D	RLM01 3BDZ000398R1	900G01-0102
1775-GA	CI860 CI860K01 3BSE032444R1	900G02-0001
1756-RM	IIMCP02	900G02-0102
2711C-T4T	086348-001	900G03-0001
1756-OV16E	CI854AK01 3BSE030220R1	900G03-0102
1775-S5	DO810 3BSE008510R1	900G32-0001
1769-L36ERM	07DC92 GJR5252200R0101	900H01-0102
1756-L1M3	07CR41-C12	900H02-0001
1747-L543P	DSTC452 5751017-A	900H02-0102
1757-SRM	DSBB110A 57330001-Y	900H03-0001
1784-PCIC	DSQC328A 3HAC17970-1/05	900H03-001
1769-OV32T	PAB02 P70870-4-0369059 369059A10	900H32-0001
1747-L511	PFEA111-65 3BSE050090R65	900H32-0102
1771-NR	100472-012	900P01-0001