Emerson Epro MMS6350/DP PROFIBUS-DP Interface Module

Emerson MMS6350/DP Epro Brand New In Stock

Description

The EPRO MMS6350/DP is a digital overspeed protection system that is designed to protect rotating machines from overspeeding. It is a three-channel system that can measure the speed of up to three different shafts. The system has a PROFIBUS-DP interface that allows it to be integrated into existing control systems.
Features
SIL3 certified according to DIN EN 61508
Up to 6 limit values per channel
Two current outputs per channel with zoom and dual current function
Mutual comparison of pulses and output signals between all channels
Redundant power supplies for monitors and backplane
Self-test functions for electronic circuits and sensors
Simplified fault detection by display messages in plaintext
Electrical isolation of binary input and output signals
Wiring by means of preformed cables and converters in the control cubicle
RS 232 interface for input of parameters
RS 485 interface for data exchange with the host computer
Hot swap of boards during operation
Technical Specifications
Measurement range: 0.1 Hz to 20 kHz
Accuracy: ±0.1% of full scale
Resolution: 0.01 Hz
Response time: < 1 ms
Power supply: 24 VDC ± 10%
Power consumption: < 20 W
Operating temperature: -20°C to +70°C
Storage temperature: -40°C to +80°C
Protection class: IP67

Main Products

You May Like

Advantage Products 

①Allen-Bradley(USA AB)Series
②Schneider(Schneider Electric)Series
③General electric(General Electric)Series
④Westinghouse Series
⑤SIEMENS Series
⑥ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robot

⑦Westinghouse：OVATION System、WDPF System、MAX1000 system spare part
Conversion、I/O Signal processing、Data communication systems Digital-to-Analogue

⑧Invensys Foxboro I/A Series system，FBM（I/O）SCS、Trapezoidal logic control、Accident recalling、DAC
Invensys Triconex: Redundant fault-tolerant control system、Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture
⑨Siemens：Siemens MOORE，Siemens Simatic C1，Siemens CNC system
⑩Bosch Rexroth：Indramat，I/O module,PLC controller, Driver Module

About Epro Germany

Epro was founded in Gronau, Germany in 1970. Its predecessor was Dutch Signal Equipment Co., LTD., which was then a factory owned by the PHILIPS group in Europe.

In 1992, the company became ePRO Electronic Systems Co., LTD.

Epro company in 1994 in the wave of Philips group reorganization merger and Philips steam turbine monitoring protection division, and inherits the Philips company in the field of rotating machinery protection accumulated decades of experience and well-equipped production facilities, and Philips, cultivate many years of senior experts and sales and after-sales service network all over the world.

In 1995, EPro incorporated AEG's rotating machinery protection division, increasing the company's technical strength.

Since 1997 and 1998, EPRO has introduced the most advanced rotating machinery monitoring system, MMS6000, on the basis of Philips RMS-700 turbine monitoring and protection system.

As a professional manufacturer of rotating machinery monitoring and protection systems, its products are widely used in the world.

Its reliable quality, stable performance has gained the user's trust. In China, the market performance has also developed from the initial 18 RMS700 systems introduced by the Power Department to nearly a thousand MMS6000 systems in operation throughout the country today, from millions to 50,000 small units, from nuclear island main equipment to conventional thermal power main steam turbine, and various auxiliary machines with successful experience in using MMS6000 systems.