GE Fanuc IC200CPUE05 Description

  • 2021-07-23

The IC200CPUE05 is a CPU designed by GE for the VersaMax series. The IC200CPUE05 has a built-in interface, which allows it to serve as the system controller for a maximum of 64 modules with up to 2048 I/O points.

The IC200CPUE05 has two serial ports that are software configured for SNP and RTU slave, Serial I/O operation, and for Local Station Manager operation (Port 1 only). When either port is being used for RTU, an automatic switch to SNP slave mode is required. If the IC200CPUEO5 is in Stop mode and the CPU is configured for Serial I/O, a port will automatically return to SNP slave. Port 2 to can offer power to an external device if power requirement is 100 mA or less at 5VDC. Port 1 is an RS-232 port with a 9-pin female connector. If Port 1 is configured for CPU use, it can be forced by using the Ethernet Restart pushbutton. Port 1 will stay in its current mode until PLC is power cycled or the Ethernet Restart pushbutton has been pressed. Port 2 is an R3-485 port with a female D-sub connector that has 15-pins. The port can be used for program, configuration, and updates and can be attached directly to an RS-485/RS-232 adapter.

The IC200CPUE05 module is a user-configurable CPU module manufactured by GE Fanuc as a member of the VersaMax product line. It is part of the VersaMax product family, and it provides all the PLC functionalities in 1 small device.  This CPU module works with a maximum of 64 modules and up to 2048 I/O points. It also comes with 2 serial ports which are RS-485 and RS-232 ports that are used for active serial communication. The IC200CPUE05 CPU module comes with a built-in Ethernet Interface and it can be configured seamlessly by the use of programmer software. Other notable specifications of this module include a system flash memory along with a battery-backed RAM. The current rating of this unit is 650 milliamps and it has an input voltage rating of 3.3 Volts DC. It supports DIN rail mounting and it has a configurable memory capacity of 128 KB. The accuracy of this module’s real-time clock is 100 ppm with a delay of -/+ 9 seconds.
The GE Fanuc VersaMax IC200CPUE05 CPU module has a super capacitor which can power the memory for about 1 hour if the power fails. It comes with a run and stop switch to help control its operation and applications. It can also be used to process the floating point data functions in the system. The GE Fanuc IC200CPUE05 CPU module has 2 sets of LED indicators that are located on the lower right corner and the top corner of the module. The LED indicators include the “OK,” “PWR,” “FAULT,” “FORCE,” “RUN,” “PORT 1,” and “PORT 2,” indicators which turn on when the module is powered on and which also send various update messages to the operators. This CPU module supports the instruction list and ladder diagram programming languages.

170AAI52040 AAT145-S00 KJ4001X1-CG1 T8312
140DDI84100 ADV151-P03 KJ4001X1-CH1 T3481
140DD084300 ADV151-P00 KJ2002X1-BA1 T3511
171CCC76010 AAI143-S00 KJ3004X1-BA1 T3310
140DDO35300 AAR181-S00 KJ1501X1-BB1 T3401
140NOE77101 AAP135-S00 KJ4001X1-CA1 T3420A
140CRP93200 ADV551-P00 KJ4001X1-CC1 T3401
140CHS11000 AAR145-S00 KJ4001X1-CB1 T3481
140ACI03000 CP451-10 KJ2005X1-MQ1 T3310
140ACI04000 VI701 KC3011X1-BA1 T8225
140ACO13000 VI702 KJ3202X1-BA1 T8151B
140CRA93200 PW302 KJ3222X1-BA1 T9432

ABB PLC
Allen Bradley PLC
Bently Nevada PLC
Honeywell DCS
GE Fanuc PLC
Siemens PLC
Hima DCS modules
Schneider PLC
Ovation DCS
Emerson module
Foxboro module
YOKOGAWA electric
westinghouse
High Five PLC Parts Limited

© Copyright: 2020 High Five PLC Parts Limited All Rights Reserved.

High Five PLC Parts Limited is not owner of the brands/manufacturers featured on this website. Brand names and trademarks featured are the property of their respective 

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.