GE Fanuc IS200TBTCH1CBB IS200TBTCH1C Module

GE Fanuc IS200TBTCH1CBB IS200TBTCH1C New In Box

Description

A single-board controller is the heart of the system. The controller includes the main processor and redundant Ethernet drivers to communicate with networked I/O, and additional Ethernet drivers for the control network. A real-time, multi-tasking operating system is used for the main processor and I/O modules. Control software is provided in a configurable control block language and stored in non-volatile memory. It is similar to IEEE® 854 32-bit floating-point format, and Sequential Function Charts (SFC) are also available for complex sequencing.

The I/O network (IONet) is a dedicated, full-duplex, point-to-point protocol. It provides a deterministic, high-speed 100 MB communications network that is suitable for local or distributed I/O devices, and provides communication between the main controllers(s) and networked I/O modules. Online controllers continuously read input data directly from the IONet, which is available in single, dual, and triple redundant configurations. Both copper and fiber interfaces are supported.

The Mark VIe I/O modules consist of three basic parts: the terminal board, the terminal block, and an I/O pack. Barrier or box-type terminal blocks are mounted on a terminal board, which mounts on a DIN rail or base in the control cabinet. The I/O pack contains two Ethernet ports, a power supply, a local processor, and a data acquisition board. I/O capability grows as I/O packs are added to the control system, enabling use in a simplex, dual, or triple redundant configuration. Some process sub-systems require even more throughput; therefore, the local processors in each I/O pack run algorithms at higher rates as required for the application.

GE Fanuc In Stock

You May Like