New 8C-PCNT01 In Stock

Quality New Honeywell 8C-PCNT01 Module

Introduction

Safety Manager has 3 different key switches: • Figure 8 shows the front view of the Battery and Key switch module (BKM), where the Reset and Force Enable key switch are installed. The key switches on the BKM are wired to both CP1 and CP2. - Under normal circumstances the Reset key switch is used to start the system or restart halted system components without switch-over effect. (Turning this key switch will not interrupt process safeguarding.) - When performing on-line modification (changing the application / system configuration on-line) the Reset key switch is used to switch applications. - The Force key switch is used to enable / disable the use of forcing of IO points. With this key switch in the “on” position, forcing via a safety station is allowed. With this key switch in the “off” position all forces are cleared • Each Quadruple Processor Pack (QPP) has a 3 position key switch is installed. - The key switch on the QPP is used to idle, halt or run the QPP. When idle, the QPP can be fitted with a new application program. 

Our Advantage

ICS Triplex T8461,ICS Triplex T8311,ICS Triplex T8431,ICS Trusted Triplex T8310
All Yokogawa CP401-10,SCP461-51,Yokogawa CP451-10,ALR121-S50 Are Availabe
We Also Sell Emerson DeltaV EPRO Yokogawa Products,Call US Now.

Advantage Products

①Allen-Bradley(USA AB)Series

②Schneider(Schneider Electric)Series

③General electric(General Electric)Series

④Westinghouse Series

⑤SIEMENS Series

⑥ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots.

⑦Westinghouse: OVATION System、WDPF System、MAX1000 system spare parts.

Conversion、I/O Signal processing、Data communication systems?Digital-to-Analogue

⑧Invensys Foxboro I/A Series system，FBM（I/O）SCS、Trapezoidal logic control、Accident recalling、DAC

Invensys Triconex: Redundant fault-tolerant control system、Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture.

⑨Siemens：Siemens MOORE，?Siemens Simatic C1，Siemens CNC system.

Original And New